Included with Subscription

16 min

This section lists the equipment and accessories that are included with your Carbon subscription and Industrial Accessories Package.

M1 / M2 Printer Subscription Equipment

#	Item	Quantity
1	Printer	1
2	Cassette	2
3	Build Platform	1
4	Ethernet Cable	1
5	Power Cord	1
6	Caster Wheels (set)	1

M3 / M3 Max Printer Subscription Equipment

#	Item	Quantity
1	Printer	1
2	Cassette (1.5 per printer subscription, rounded up)	2
3	Build Platform	1
4	Ethernet Cable	1
5	Power Cord	1

M3 / M3 Max Installation Kit

These items are used to install the M3 and M3 Max printer.

#	Item	Quantity
1	Kit box (9 x 6 x 4 inches)	1
2	USB-to-ethernet adapter	2
3	Digital level	1
4	Leveling knob	1

M3 / M3 Max PM Spare Parts Kit

#	Item	Quantity
1	Particulate filter	1
2	Touchscreen protector kit	1
3	Pneumatic inlet filter	1
4	Kit box	1
5	Intake filter (MERV 8)	1

Dental Resin Starter Pack

Item	M1/M2 Printer Quantity	M3 / M3 Max Printer Quantity
DPR 10 resin (3200 mL bottle)	1	1
UMA 90, Black, 3200 mL bottle	-	1

Safety & Cleaning Accessories Kit

IMPORTANT

This list of items and accessories is everything you will need to print with Carbon’s starter pack resins. Based on the resins you plan to use, you may require additional equipment. Contact your Carbon Sales Director for specific information.

The supplies provided with your subscription agreement are the minimum quantities to enable installation and training. You will need more supplies and consumables to meet your production needs after training.

If you are using Carbon FP3D resin, you will need the General Site Prep Accessories Kit. There are supplies in that kit which accommodate the additional workflows for FP3D. Let your sales representative know so that your subscription includes the correct kit.

Reference Accessories & Supplies for purchasing links.

Item	M Series Printer	L1 Printer
Lab Infrastructure
Mat, absorbent, 2/pack	1	1
Blue shop towels	2	2
Kimwipes, 140/box	1	-
Lab coat, disposable, size XXL	5	5
Safety glasses	5	5
Gloves, nitrile, size Large, 50/pack	1	1
Gloves, polyethylene, 18 in long, size Large, 250/pack	1	-
Resin Mixing and Dispensing
Aluminum foil, roll	1	1
Container, polypropylene, round, 86 oz	-	1
Printing
Taping knife, steel blade, 14 inch	-	1
Bottle, Acetone, vented, 16 oz	1	1
Bottle, IPA, vented, 16 oz	1	1
Funnel, paper, 25/pack	1	-
Funnel strainer, 4/pack	5	-
Silicone spatula, curved edge	1	-
Silicone spatula, wide, flat blade	-	3
Post-Processing
Scraper, 1 3/4 inch wide	1	1
Dead blow mallet	1	-
Lab timer, programmable	1	-
Washtub container with lid, 4.6L	2	-
Foam swab, paddle tip, 50/bag	1	-
Baking sheet, aluminum, 20 in x 14 in	-	1
Baking pan, aluminum, 13 in x 9.5 in	1	-
Drain back Bottle, w/Spout and Cap, 3.2L, HDPE Black	-	5

Industrial Accessories Package

Most customers purchase this package. Please contact the Carbon Onboarding Team if you are not sure if you have purchased the industrial accessories as part of your Service Agreement.

#	Item	M1/M2 Printer	M3 / M3 Max Printer
1	Orbital shaker	X	X
2	M-Series pour stand	X	X
3	UV curing unit*	X	X

* IMPORTANT: The Dreve PCU LED UV curing unit is not compatible with all resins without using nitrogen. Carefully review the documentation for resins you will be using to make sure you have the right UV curing unit. If you have questions, contact your Carbon Sales Director for more information.

Note on M-Series Pour Stand

Existing Carbon customers should be aware that the M-series pour stand (launching in 2023) is larger than the previous pour stand and requires more space to operate effectively. Carbon recommends using a dedicated 24 x 30 x 18 inch table for the M-series pour stand.

See M Series pour stand for more information.

FAQ and Additional Information

What size are the Industrial Accessories pallets?

Safety and Cleaning Accessories Kit pallet: 1120 mm (44”) x 1070 mm (42”) x 915 mm (36”)

Included for Installation

This section lists items necessary for installation and initial training.

These items will need to be returned to Carbon. Save all packaging as it will be needed to return equipment to Carbon.

Customer Use

The following items are provided by Carbon to be used by the customer.

Network Configuration Device

Used to test the customer network before installation and training can be scheduled.

Packaged in cardboard box approximately 20 x 16 x 6 inches.

After use, NCD must be returned to Carbon using the included Fedex return shipping label.

#	Item	Quantity
1	Laptop computer	1
2	Power adapter & cable	1
3	Fedex return shipping label	1

Remote Familiarization Training Kit (Optional)

Equipment used for remote training.

Included if customer chooses remote familiarization.

Packaged in Pelican case approximately 16.5 x 11 x 6 inches.

After use, kit must be returned to Carbon using the included Fedex return shpping label.

#	Item	Quantity
1	Wi-fi router	1
2	Ethernet cable	1
3	Wi-fi camera	2
4	Tablet	1
5	Tripod	1
6	Clamp	1
7	Speaker	1
8	Battery pack	1
9	Fedex return shipping label	1