Dental Site Prep Guide

Floor Space

2min

Requirements
Item
M1/M2 Printers

M3 / M3 Max Printers
Printer Dimensions 
(W x D x H)
W: 543 mm (21.4")
D: 655 mm (25.8")
H: 1733 mm (68.2")
W: 760 mm (30")
D: 696 mm (27.5")
H: 1762 mm (69.5")
Minimum Clearances

Side - S
Front - F
Back - B
S: 480 mm (18.9")
F: 480 mm (18.9")
B: 380 mm (15.0")
S: 240 mm (9.4")
F: 561 mm (22.1")
B: 380 mm (15")
*All minimum facilities connections must have 1 m (36") of slack
Recommended  Clearances
Side - S
Front - F
Back - B
-
S: 240 mm (9.4")
F: 561 mm (22.1")
B: 610 mm (24")
﻿M3/M3 Max Clearances﻿ 
Item
All printers
Installation Surface
FF 25/FL 20 (moderately flat)
Hard, level, non-porous, easily cleanable surface
No carpet.
No foam tiles.
Concrete must be sealed
Seismic Anchors
Your facility may need seismic anchors to comply with local safety regulations. If using seismic floor anchors, the floor must be sealed concrete rated to at least 20.5 MPa (3,000 psi). 
To learn more about Seismic Anchors for M1/M2 Printers, download M1/M2 Seismic Anchor Installation.﻿ 
Contact Carbon for more information on seismic anchoring for M3 / M3 Max printers.
Carbon has seismic floor anchors available for purchase, contact your Sales Director or Sales Operations. 
HVAC Requirements
Controlled environment
Humidity: 30-60%
Humidity Stability: Less than ± 5% change per hour
Temperature: 18-24° C (64-75° F)
Temperature Stability: Less than 2° C (3.8° F) change per hour
Location Requirements (Other)
The printer should be placed far from vibration-producing equipment. Extreme vibration (e.g., near heavy machinery or train tracks) can cause print failures. Avoid such areas.
Elevation: Your facility must be between 0-2000 m (0-6560 ft) for proper operation.
UV Exposure: Limit UV exposure by placing Printer, resin, and work areas away from windows and UV light sources.
Recommendations:
LED lighting is recommended.
Nearby exterior windows should be coated to minimize transmission of wavelengths < 420 nm.
﻿

Item	M1/M2 Printers	M3 / M3 Max Printers
Printer Dimensions (W x D x H)	W: 543 mm (21.4") D: 655 mm (25.8") H: 1733 mm (68.2")	W: 760 mm (30") D: 696 mm (27.5") H: 1762 mm (69.5")
Minimum Clearances Side - S Front - F Back - B	S: 480 mm (18.9") F: 480 mm (18.9") B: 380 mm (15.0")	S: 240 mm (9.4") F: 561 mm (22.1") B: 380 mm (15") *All minimum facilities connections must have 1 m (36") of slack
Recommended Clearances Side - S Front - F Back - B	-	S: 240 mm (9.4") F: 561 mm (22.1") B: 610 mm (24") M3/M3 Max Clearances

Item	All printers
Installation Surface	FF 25/FL 20 (moderately flat) Hard, level, non-porous, easily cleanable surface No carpet. No foam tiles. Concrete must be sealed
Seismic Anchors	Your facility may need seismic anchors to comply with local safety regulations. If using seismic floor anchors, the floor must be sealed concrete rated to at least 20.5 MPa (3,000 psi). To learn more about Seismic Anchors for M1/M2 Printers, download M1/M2 Seismic Anchor Installation. Contact Carbon for more information on seismic anchoring for M3 / M3 Max printers. Carbon has seismic floor anchors available for purchase, contact your Sales Director or Sales Operations.
HVAC Requirements	Controlled environment Humidity: 30-60% Humidity Stability: Less than ± 5% change per hour Temperature: 18-24° C (64-75° F) Temperature Stability: Less than 2° C (3.8° F) change per hour
Location Requirements (Other)	The printer should be placed far from vibration-producing equipment. Extreme vibration (e.g., near heavy machinery or train tracks) can cause print failures. Avoid such areas. Elevation: Your facility must be between 0-2000 m (0-6560 ft) for proper operation. UV Exposure: Limit UV exposure by placing Printer, resin, and work areas away from windows and UV light sources. Recommendations: LED lighting is recommended. Nearby exterior windows should be coated to minimize transmission of wavelengths < 420 nm.

Utilities

Hazardous Waste and Lab Safety