Dreve PCU 90

the dreve pcu 90 is a uv cure oven that has been validated for use with carbon one part resins a source of nitrogen gas is required to operate the dreve pcu 90 carbon resins are validated for either the upper (with the displacer displacer ) or lower level setup per resin protocol carbon resins are validated for either the either the upper (with the displacer) or lower level setup per resin protocol foil may be used to place your parts on while inside the unit, to keep the surface clean from resin follow operation instructions in the pcu 90 manual the dreve pcu 90 is especially useful for production when printing one part resins with an l1 printer due to its large cure chamber that can accommodate many parts operation set cure time load platform and start pcu 90 remove platform product manual english & german/deutsch https //archbee doc uploads s3 amazonaws com/uxbzokjjtgpphjapq8fvm y40q13qzyhv4ugg2f4p o 20250521 202625 pdf