Release Notes
Printer Software Release Notes

v1.27

8min
release notes software v1 27 overview hello thank you so much for your support and engagement with our teams your feedback helps drive our development process and makes our products better in this release, we’ve included the following improvements to your print process changes in how we print improving consistency of parts across a build other improvements island detector update project analysis time decrease ability to always abort your print please note due to covid 19 and shelter in place restrictions, we’ve skipped releasing v1 26 externally we can’t wait to hear from you about this release keep printing great parts and sharing your feedback we appreciate it, and it makes our products better if you have any questions, please contact the carbon service team at support\@carbon3d com mailto\ support\@carbon3d com or alex at jianga\@carbon3d com mailto\ jianga\@carbon3d com changes in how we print improving consistency of parts across the build we’re continuously striving for more accurate and higher fidelity parts we have changed the light intensity to be more uniform across the build plane, which will improve the accuracy and consistency of parts printed across a build if you are printing multiples of the same part in a build, you may notice the overall mechanical properties and accuracy of your parts in the corners becoming more consistent with those closer to the center of your build other improvements island detector this feature was first released for 1 25 but had been turned off due to an issue that slowed down project analysis it is now fixed, and this feature will be available in 1 27 in the project analysis panel for details, please refer to the v1 25 docid\ jjahwhnxfuje42zecwwzd release notes project analysis time decrease we’ve improved how we analyze your projects by speeding up calculations during project analysis depending on the height and size of your build, you may notice analysis times decrease by up to 35% this speedup will not impact how your parts print and also, does not affect the analysis time of projects that use fpu 50 or sil 30 ability to always abort your print we understand that sometimes, you may want to abort a print shortly after you start it and before the platform starts lowering into the resin we’ve added the ability to abort your print while it’s preparing, so you won’t have to wait thanks for your feedback we love hearing from you about your workflow, your parts, and how to improve keep your insightful feedback and ratings coming we read them carefully and follow up when you request that we contact you if you prefer real time feedback, you can always email jianga\@carbon3d com mailto\ jianga\@carbon3d com or contact the carbon service team, support\@carbon3d com mailto\ support\@carbon3d com