Disclaimers

legal disclaimer lucitone digital print is a product of dentsply sirona inc because this resin is not manufactured by carbon, the following disclaimer applies to dentsply sirona inc resin including mechanical properties, handling, printing, washing, and curing it does not apply to carbon’s hardware, software, or accessories the training contained herein includes the resin manufacturer’s information available as of the release date of this course this information is subject to change from time to time without notice you are responsible for determining that such information is correct and current as of the date of use and sufficient for your intended purpose training source https //www dentsplysirona com/en us/categories/lab/3d printed dentures html https //www dentsplysirona com/en us/categories/lab/3d printed dentures html there you will find directions for use (including required accessories, dispensing, and post processing instructions) purchasing information technical data sheet (tds) material safety data sheet (sds) instructions for use (ifu) and other documents can be downloaded from dentsply sirona here https //lp dentsplysirona com/en/download center html non dental usage disclaimer lucitone digital print has been developed specifically for use as a dental device all of the content herein is written to produce dental devices all validation of material properties, orientation & support strategy, print settings, washing, and curing procedures was performed using base geometries on a standard cassette using manual (non smart part washer) washing and the eclipse ® processing unit ii curing device usage of this material outside of these conditions will result in limited carbon support contact carbon for more information