Disclaimers

legal disclaimer vita vionic® dent resin is a product of vita™ because this resin is not manufactured by carbon, the following disclaimer applies to vita's resin including mechanical properties, handling, printing, washing, and curing it does not apply to carbon’s hardware, software, or accessories the training contained herein includes the resin manufacturer’s information available as of the release date of this course this information is subject to change from time to time without notice you are responsible for determining that such information is correct and current as of the date of use and sufficient for your intended purpose training source https //www vita zahnfabrik com/en/digital dentures/3d printing/vita vionic dent resin 324199,27568 html there you will find link to instructions for use and safety data sheets non dental usage disclaimer vita vionic® dent resin has been developed specifically for use as a dental device all of the content herein is written to produce dental devices all validation of material properties, orientation & support strategy, print settings, washing and curing procedures was performed using teeth geometries on a standard cassette using manual (non smart part washer) washing and a sprintray approved uv curing device usage of this material outside of these conditions will result in limited carbon support contact carbon for more information