Disclaimers

legal disclaimer keyprint® keyguard™ is a product of keystone industries because this resin is not manufactured by carbon, the following disclaimer applies to keystone’s resin including mechanical properties, handling, printing, washing and curing it does not apply to carbon’s hardware, software or accessories the training contained herein includes the resin manufacturer’s information available as of the release date of this course this information is subject to change from time to time without notice you are responsible for determining that such information is correct and current as of the date of use and sufficient for your intended purpose training source https //keyprint keystoneindustries com/keyguard/ there you will find directions for use (including required accessories, dispensing and post processing instructions) purchasing information technical data sheet (tds) material safety data sheet (sds) non dental usage disclaimer keyprint® keyguard™ has been developed specifically for use as a dental device all of the content herein is written to produce dental devices all validation of material properties, orientation & support strategy, print settings, washing, and curing procedures was performed using splint geometries on a standard cassette using manual (non smart part washer) washing and 4 different curing devices dreve pcu led (with nitrogen) dreve pcu 90 (with nitrogen) otoflash g171 (with nitrogen) uvitron intelliray 400w usage of these materials outside of these conditions will result in limited carbon support contact carbon for more information