---
title: After Washing
slug: troubleshooting/after-washing
createdAt: 2025-02-19T22:09:15.250Z
---

:::::ExpandableHeading{isOpen="true"}
## The printed part has a defect.

::::WorkflowBlock
:::WorkflowBlockItem
**Check the Part Defects Library**

Go to [Part Defects Library](docId\:hZus1iJS_aM872NOaLmvm). 
:::

:::WorkflowBlockItem
**Find the matching defect**

Compare your part to the part defect images. Pay particular attention to the **Print Defects** (that might not have been visible before washing) and the **Processing Defects.**
:::

:::WorkflowBlockItem
**Go to part defect**

Click on the matching part defect and follow the troubleshooting steps.
:::

:::WorkflowBlockItem
**Contact Carbon Support**

If you are unable to find a matching defect, contact [Carbon Support](docId\:K86Zo5vcyN_wqJL3vdGFt).
:::
::::
:::::

***

:::CtaButton{label="RETURN TO TROUBLESHOOTING HOME" docId="SBKvj9GHxIc1JhT0vdyVz" openInNewTab="true"}

:::