---
title: Recommended - Supplied by Customer
slug: site-prep/dental-recommended
docTags:
createdAt: 2024-06-12T17:30:53.040Z
---
This section lists items that Carbon recommends. Customers may purchase these as needed.
# Safety Items
Carbon strongly recommends purchasing these items:
1. Spill kit
2. ABC dry chemical fire extinguisher
3. Eyewash station
:::hint{type="info"}
**Customer is responsible for complying with all applicable state and federal safety regulations.**
:::
# Accessories & Consumables
The following items are useful for M1, M2, M3, M3 Max, and L1 printers.
| **Accessories** | **Additional Consumables** |
| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| UPS battery back up
Nitrile gloves in additional sizes
Wash containers, various sizes
Baking mesh
Drying rack
Plastic bin for salt
Salt sifter
Stainless steel tent sign
Sharpies
Scissors
Duct or vinyl tape
Large floor mat | Kimwipes
Shop towels
Isopropanol (IPA)
Aluminum foil
Silicone spatula
Transfer pans
Yellow scrapers
Scraper blades
Funnel strainers |
###
## Notes
### UPS battery back up
::::VerticalSplit{layout="right"}
:::VerticalSplitItem
- **UPS battery back up** units protect printers against power outages and surges.
- For the **M1/M2 Printers,** we recommend a [1500 VA uninterruptible power supply with an additional battery pack](docId:95TwE3ttL-5ihI6dNl4XI) to prevent the printer from power cycling during power outages. At a minimum, you must have the printer and part washer plugged into separate power strips with adequate surge protection.
- **M3 Printers** draw 850 VA during unheated and 1200 VA during heated prints. You may use [online tools](https://www.apc.com/shop/us/en/tools/ups_selector/server/load) to calculate the appropriately sized UPS and battery pack(s) for your needs.
- **M3 Max Printers** draw 1150 VA during unheated and 1500 VA during heated prints. You may use [online tools](https://www.apc.com/shop/us/en/tools/ups_selector/server/load) to calculate the appropriately sized UPS and battery pack(s) for your needs.
- **L1 Printers** draw 1300 VA with an unheated and 2300 VA with a heated cassette. You may use [online tools](https://www.apc.com/shop/us/en/tools/ups_selector/server/load) to calculate the appropriately sized UPS and battery pack(s) for your needs.
:::
:::VerticalSplitItem
::Image[]{src="https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/W5g63e-nVAgRkX9EmV3em_ups-battery-tall-234x800.png" size="50" width="800" height="2735" position="center" alt="Uninterruptible power supply" darkWidth="800" darkHeight="2735" showCaption="false"}
:::
::::
### Nitrile gloves in additional sizes
Purchase multiple sizes to fit different users in the lab.
::Image[]{src="https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/Ecld2JdXIWCU8Sg3R4oti_image.png" size="40" width="500" height="185" position="flex-start" showCaption="false"}
### Wash containers, various sizes
- Provides flexibility to wash different sized parts.
- Smaller containers require less solvent to wash parts.
- Larger containers may be required to wash parts printed on L1 printers.
::Image[]{src="https://articulateusercontent.com/rise/courses/8C_hErPbR2ufuWpgMOzjw9LM3z3fFJBZ/bAoADpSuv69CtB3q.png" size="40" width="1074" height="555" position="flex-start" showCaption="false"}
### Baking mesh
- Temperature resistant nylon grid.
- Helps prevent warping of flat parts during thermal curing.
- Place on top of **drying rack** during baking.
::Image[]{src="https://articulateusercontent.com/rise/courses/8C_hErPbR2ufuWpgMOzjw9LM3z3fFJBZ/Z0QSgKy0igPjQ_Hp.jpg" size="40" width="1453" height="535" position="flex-start" showCaption="false"}
### Drying rack
- Supports **baking mesh** during thermal curing to prevent warping of flat parts.
::Image[]{src="https://articulateusercontent.com/rise/courses/8C_hErPbR2ufuWpgMOzjw9LM3z3fFJBZ/f9_NAxN-SzXf2tHF.jpg" size="50" width="1454" height="535" position="flex-start" showCaption="false"}
### Plastic bin for salt
- Storage for salt used during salt curing.
- Captures sifted salt.
::Image[]{src="https://articulateusercontent.com/rise/courses/8C_hErPbR2ufuWpgMOzjw9LM3z3fFJBZ/UNJ3ZRhzUW2bdiQ0.jpg" size="50" width="1454" height="534" position="flex-start" showCaption="false"}
### Salt sifter
- Filters salt after baking.
- Catches small parts.
- Captures clumps of salt for disposal.
::Image[]{src="https://articulateusercontent.com/rise/courses/8C_hErPbR2ufuWpgMOzjw9LM3z3fFJBZ/LKc4q6TpvooRUGTp.jpg" size="60" width="1453" height="534" position="flex-start" showCaption="false"}
### Stainless steel tent sign
- For tracking parts through washing and baking.
- Write identifying information on tag with
- Wipe off with IPA and reuse.
::Image[]{src="https://articulateusercontent.com/rise/courses/8C_hErPbR2ufuWpgMOzjw9LM3z3fFJBZ/0cIVbezqbGb3vSaA.jpg" size="60" width="1125" height="413" position="flex-start" showCaption="false"}
### Sharpies
- Write on trays, towels,
::Image[]{src="https://articulateusercontent.com/rise/courses/8C_hErPbR2ufuWpgMOzjw9LM3z3fFJBZ/f2mrbZq3IZo2dESI.png" size="60" width="1125" height="405" position="flex-start" showCaption="false"}
### Scissors
- Cut absorbent mats to fit your work surface.
::Image[]{src="https://articulateusercontent.com/rise/courses/8C_hErPbR2ufuWpgMOzjw9LM3z3fFJBZ/0wll7kHy46U6LOMP.png" size="38" width="1550" height="793" position="flex-start" showCaption="false"}
### Duct or vinyl tape
- Secure mats to benchtops.
::Image[]{src="https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/pJBK-cdkKJ8LjrmDPKPlK_image.png" size="30" width="493" height="407" position="flex-start" showCaption="false"}
### Large floor mat
- Use near workbench to reduce fatigue and prevent slipping.
::Image[]{src="https://articulateusercontent.com/rise/courses/8C_hErPbR2ufuWpgMOzjw9LM3z3fFJBZ/y6JjeKAcSR79gDDS.jpg" size="62" width="1125" height="414" position="flex-start" showCaption="false"}
Additional Consumables
Carbon recommends keeping these items well stocked to prevent work stoppages:
::::VerticalSplit{layout="middle"}
:::VerticalSplitItem
- Kimwipes
- Shop towels
- Isopropanol (IPA)
- Aluminum foil
- Silicone spatulas
:::
:::VerticalSplitItem
- Transfer pans
- Yellow scrapers
- Scraper blades
- Funnel strainers
:::
::::
To purchase these recommended items and more, go to [Accessories & Supplies](docId:95TwE3ttL-5ihI6dNl4XI).