---
title: Print Preparation
slug: process/print-preparation
docTags: 
createdAt: 2024-06-28T23:21:00.104Z
---

Before parts are printed, a build has to be prepared. This initial step is known as **print preparation** (also **Print Prep** or **Digital Prep**), because an stl is imported into the [Printer UI](docId\:oId4ZNZtZYeltTPVJ984a). The printer UI is accessed using a web browser. This software interface controls the chosen printer.

To create a build for printing, follow the steps below

::embed[]{url="https://player.vimeo.com/video/527514513"}



1\. **Select a printer** from the dashboard
2\. Click **New Project** and **import an STL file**
3\. Select a **resin**
4\. **Orient** the part
5\. Add **supports** (if needed)
6\. **Layout **the build platform
7\. Optional adjustments
    • Scale parts
    • Part labels
    • Print controls

8\. Run **Project Analysis**
    • Review Unvented Volumes
    • Check Slices
    • Review islands
9\. Add to **print queue**
10\. Click **Print**



:::hint{type="info"}
**Note about "Click Print"** - This action sends the project to the printer. The print only begins once an operator starts the print at the printer or on the pop-up window that appears after clicking print.
:::

:::hint{type="success"}
**Tip **- When setting up a build in the Printer UI, start on the left and work your way to the right. After importing your part, begin by selecting a material on the left. Then work from left to right on the top bar of the UI. Finishing on the right of the screen with Print.
:::