---
title: Opticure LED Cube
slug: process/opticure-led-cube
docTags: 
createdAt: 2025-01-10T01:54:51.163Z
---

::Image[]{src="https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/w3G9P7pOy5zMbYqmusZkX_image.png" size="50" width="800" height="845" position="center" showCaption="false"}

# Operation

:::hint{type="warning"}
**Be sure your part is completely dry before curing. **
:::

::::VerticalSplit{layout="middle"}
:::VerticalSplitItem
1. Put on a **new** pair of gloves. 
   - Your gloves will be soiled from washing your part.
2. Press <font color="#30C49A">**SET** </font>button. The display will show ‘SEt.1’ with the cure time in red letters below.&#x20;
   - Use <font color="#FF9900">**arrow buttons**</font> to set cure time according to the resin specific protocols (1.00 = 1 minute 00 seconds).
3. Place the parts to be cured in the center of the tray.&#x20;
4. Close the door.&#x20;
5. Press the <font color="#05A9F4">**blue start button.**</font>
6. Rotate the part and repeat until all surfaces have received UV light.&#x20;
   - Since the Opticure LED Cube does not produce heat, pausing between curing each side is not necessary.
:::

:::VerticalSplitItem
![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/rLJKZWIRwhqsoSE8gDPdE_image.png)
:::
::::

:::hint{type="info"}
**If you open the door, the UV lamp turns off, but turns back on the when the door is closed.**
:::