--- title: Heinzen Spinner slug: process/heinzen-spinner description: Discover the Heinzen Spinner, a powerful industrial centrifugal device engineered for simultaneous processing of up to three platforms for solvent-free cleaning while recapturing and reusing liquid resin. docTags: createdAt: 2025-02-13T19:51:11.165Z --- The Heinzen Spinner is an industrial centrifugal spinner that can accommodate up to **three platforms** at once. The high centrifugal-forces generated by this spinner result in **solvent-free** cleaning of parts. A discharge spout allows for **recapturing resin spun off of parts** during spinning. Resins may be filtered and reused, being mindful that two-part resins must be used within their pot lifewindow. This spinner is built for the most demanding production environments and enables fast, cost-effective manufacturing of Carbon-based applications. ## Platform Loading When purchasing a Heinzen Spinner for Carbon DLS production, the spin chamber will be **equipped** to receive an **L1 platform**, or an **adapter for M3 and M3 Max platforms**. For both items: - Slide platform or adapter side rails into slot on **both sides** - Fully insert the platform or adapter and **click into place** - Load *all three slots* in the spinner with the same platform to **ensure balance** ### L1 Platform ::embed[]{url="https://vimeo.com/1213987663?dnt=1"} ### M3 and M3 Max Adapter ::embed[]{url="https://vimeo.com/1213987664?dnt=1"} ::::VerticalSplit{layout="left"} :::VerticalSplitItem ***Adapter Installation*** Correct installation of the adapter requires both sides to be firmly held in the **slots**. ::: :::VerticalSplitItem ![Correct M3 adapter installation](https://res.cloudinary.com/carbon3d/image/upload/t_auto_quality_format/Education/Process/Washing/Heinzen-Spinner/M3-adapter_correct.png "CORRECT") ::: :::: :::hint{type="danger"} Incorrect installation will result in **damage to the spinner**. ::: ::::VerticalSplit{layout="middle"} :::VerticalSplitItem **One side outside of slot** ![Incorrect M3 adapter installation](https://res.cloudinary.com/carbon3d/image/upload/t_auto_quality_format/Education/Process/Washing/Heinzen-Spinner/M3-adapter_wrong-a.png "INCORRECT (purple shading)") ::: :::VerticalSplitItem **Both sides outside of slot** ![Incorrect M3 adapter installation](https://res.cloudinary.com/carbon3d/image/upload/t_auto_quality_format/Education/Process/Washing/Heinzen-Spinner/M3-adapter_wrong-b.png "INCORRECT (purple shading)") ::: :::: :::hint{type="success"} The M3/M3 Max adapter **may be left inside the chamber** between spins. ::: :::hint{type="info"} It is unlikely that the adapter will need cleaning because resin is pulled away from it during spinning. If, however, resin ends up on this accessory, IPA on a blue shop towel may be used to clean the adapter. Do not spray solvent directly into the spinner; always dampen the blue towel outside of equipment. ::: ***Installing the M3/M3 Max Platform******* The spinner adapter is designed to fit all M3 and M3 Max platforms: - ✔️ [Standard Platform](docId:2nxiKvTUJloOWyMApXUNL)* AO compatible* - ✔️ [Legacy Platform](docId:2nxiKvTUJloOWyMApXUNL) To install the platform, simply slide the platform along the compatible rails on the adapter. Ensure that the platform has fully engaged both rails and is sitting flat against the adapter. :::hint{type="danger"} You must** use the same platform version** on *all three adapters* to ensure balance. ::: ![M3 and M3 Max Adapter Rails](https://res.cloudinary.com/carbon3d/image/upload/t_auto_quality_format/Education/Process/Washing/Heinzen-Spinner/M3-adapter_slots.png) ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ![Standard M3 Platform](https://res.cloudinary.com/carbon3d/image/upload/t_auto_quality_format/Education/Process/Washing/Heinzen-Spinner/M3-adapter_AO-M3.png "Standard M3 Platform") ::: :::VerticalSplitItem ![Standard M3 Max Platform](https://res.cloudinary.com/carbon3d/image/upload/t_auto_quality_format/Education/Process/Washing/Heinzen-Spinner/M3-adapter_AO-M3-Max.png "Standard M3 Max Platform") ::: :::: ## Product Manual For operating instructions, refer to the product manual. :::hint{type="info"} For spin time and RPM, refer to resin protocol sheets. ::: ::File{src="https://api.archbee.com/api/presign/3CesIL2dYMCHPZvRjp8S0/adJ_V9CbLNflwVAYlaK78-20260310-172742.pdf" label="111203-01-H-PRODUCT MANUAL, SPINNER, SD50-VLT.pdf"} ::Image[]{src="https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/1hxIYSd8_QgQrcJIm1R65_spinner-and-controls-01-car8554-car8548-car8549-2000px.png" size="70" width="2000" height="1848" position="center" alt="Heinzen Spinner" darkWidth="2000" darkHeight="1848" showCaption="false"} Contact [Carbon Support](docId\:K86Zo5vcyN_wqJL3vdGFt) for more information about integrating the spinner into your workflow.