---
title: Dreve PCU 90
slug: process/dreve-pcu-90
docTags: 
createdAt: 2025-01-10T01:58:30.194Z
---

The Dreve PCU 90 is a UV cure oven that has been validated for use with Carbon one part resins. 

:::hint{type="info"}
A source of nitrogen gas is required to operate the Dreve PCU 90.
:::

::::VerticalSplit{layout="middle"}
:::VerticalSplitItem
- Carbon resins are validated for either the **upper&#x20;**(with the <font color="#6752ff">**displacer**</font>) or **lower level setup per resin protocol**.
- Carbon resins are validated for either the either the upper (with the displacer) or lower level setup per resin protocol. 
- Foil may be used to place your parts on while inside the unit, to keep the surface clean from resin.&#x20;
- Follow operation instructions in the PCU 90 manual.&#x20;
:::

:::VerticalSplitItem
![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/C_a9k0pJjVEqmqx_FfQDd_image.png "PCU 90 with displacer")
:::
::::

The Dreve PCU 90 is especially useful for production when printing one part resins with an L1 printer due to its large cure chamber that can accommodate many parts.

# Operation

## Set Cure Time

::embed[]{url="https://player.vimeo.com/video/527516965?dnt=1"}

## Load Platform and Start PCU 90

::embed[]{url="https://player.vimeo.com/video/527516939?dnt=1"}

## Remove Platform

::embed[]{url="https://player.vimeo.com/video/527516954?dnt=1"}

# Product Manual

::::VerticalSplit{layout="middle"}
:::VerticalSplitItem
**English & German/Deutsch**
:::

:::VerticalSplitItem
::File{src="https://api.archbee.com/api/presign/uXbZOKjJTGpPhjapQ8fvM-y40Q13qZyhv4ugg2f4p-O-20250521-202625.pdf" label="INST_PCU 90_DE_GB_FR.pdf"}
:::
::::