---
title: Loctite 3D MED414 Blue
slug: materials/loctite3d-med414
description: Available as an early access resin for Carbon printers, LOCTITE® MED414, a high-performance medical-grade photopolymer resin ideal for elastomeric applications in medical devices.
docTags: 
createdAt: 2024-11-15T17:04:08.266Z
---

# Overview

::::VerticalSplit{layout="middle"}
:::VerticalSplitItem
LOCTITE® MED414 is a medical grade soft photopolymer resin with excellent elongations and tear strength properties. Good tear resistance and strength make this material ideal for use in a wide variety of elastomeric medical device and skin contact applications.
:::

:::VerticalSplitItem
![Picture provided by Loctite 3DP & the Ivaldi Group](https://res.cloudinary.com/carbon3d/image/upload/Education/Materials/elastomer/Loctite-3D-MED414-Blue/loctite-3d-med-414-parts_edited.png)
:::
::::

:::hint{type="warning"}
Early Access resin on Carbon printers. [Read More](https://www.carbon3d.com/resources/blog/expanding-material-offerings-to-enable-more-end-use-application-production)
:::

# Resource Links

::::LinkArray
:::LinkArrayItem{headerType="IMAGE" headerImage="https://api.archbee.com/api/optimize/dptYqcTHPbVZhe3zuNg4v-yZnHZ5VDqzKJosZJznLXm-20241119-021407.png"}
**[About the Material
](https://www.loctiteam.com/loctite-3d-med414-biocompatible/)**Material overview and uses cases  
:::

:::LinkArrayItem{headerType="IMAGE" headerImage="https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/meEa1m4VN4HOvIJpjIIld-20251016-220433.jpg"}
**[Technical Data Sheet
](https://dm.henkel-dam.com/is/content/henkel/Loctite-3D-MED414-A50-Blue)**Mechanical properties and data
:::

:::LinkArrayItem{headerType="IMAGE" headerImage="https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/1r3fpdvMUMFVZGfey2Tjn-20251016-221405.jpg"}
**[Safety Data Sheet](https://www.loctiteam.com/wp-content/uploads/2021/05/Guideline-for-Search-%E2%80%93-Material-Safety-Data-Sheet.pdf)**
*Link to instructions for searching on Henkel site*
:::
::::

# Compatibility with Carbon products

- M1, M2, M3, M3 Max and L1 printer

# Post-Processing

- Wash for 5 minutes in IPA on orbital shaker
- UV cure in Dymax ECE 5000 for 5 minutes per side

# Manufacturer Instructions for Use (IFU)

Refer to Henkel documentation for complete information including mechanical properties, full printing workflow and more.

[Henkel LOCTITE 3D MED414™ Blue TDS and Workflow](https://dm.henkel-dam.com/is/content/henkel/Loctite-3D-MED414-A50-Blue)

# Purchasing Information

- North America - [LOCTITE 3D MED414 Resin | MatterHackers](https://www.matterhackers.com/store/l/loctite-3d-med414-resin/sk/MU8LU2A6)
- Europe - [Innotech](https://www.innotech-rot.de/)
  - Via PO emailed to [3Dprinting@innotech-rot.de](mailto:3Dprinting@innotech-rot.de)
  - EU Product IDH# MED414: 2810997