Loctite IND405 Clear
LOCTITE® IND405™ Clear is now available for Carbon printers to produce parts with a frosted clear aesthetic in a tough one-part resin compatible with the Smart Part Washer.
About the Material Material overview and uses cases
Technical Data Sheet Mechanical properties and data
Safety Data Sheet Link to instructions for searching on Henkel site
Europe
LOCTITE® IND405™ Clear has a high cure-thru.
- Small holes and deeply engraved features oriented vertically will be affected. These features may need to be oversized or modified by at least 0.3 mm to compensate.
- Features below 1.5 mm in size may not fully resolve. Reference design guidelines for holes for guidance on design compensation.
X,Y-PLANE, POSITIVE SPACE (mm) | X,Y-PLANE, NEGATIVE SPACE (mm) | Z-DIRECTION, NEGATIVE SPACE (mm) |
|---|---|---|
0.5 | 1 | 1.5 |
For best results when reclaiming resin, users should place reclaimed resin into a separate light-blocking bottle so that the fresh resin maintains it’s translucency. This ensures that customers can choose to either mix new/used resin for the next print or use fresh resin based on the desired material properties of the printed part.