Elastomeric Materials
EPU 40
6min
Highly elastic, tear resistant, and resilient
EPU 40 offers a combination of tear strength, moderate energy return/damping, and elongation making it perfect for vibration isolation, gaskets, and seals. It is a good choice for applications where high elasticity and tear resistance are needed. It is comparable to commercial TPUs with a Shore A hardness of 70.
About the Material Material overview and uses cases
Technical Data Sheet Mechanical properties and data
Safety Data Sheet Login required
German/Deutsch
Spanish/Español
Japanese/日本語
Uneven resin flow and a swirling, sparkling appearance when dispensing EPU 40 is a sign that the Part A resin component has crystallized as a result of storage below recommended temperatures.
Crystallized EPU 40
- Remove the green stopper on the cartridge and look for evidence of crystal formation around the rim of the Part A resin component opening (larger side of the cartridge).
- If you don't see any crystals on the rim but want to check more thoroughly, dip a thin spatula 1 cm into the resin component, remove the spatula, and inspect the component.
- If crystallization is present, incubate cartridges per resin protocols in an oven or incubator.
Updated 30 Jan 2025
Did this page help you?