--- title: DENTCA Try-In slug: materials/dentca-try-In description: Discover the comprehensive guide for using DENTCA® Try-In resin with Carbon M-Series printers. This document provides step-by-step instructions for preparing, printing, and curing try-ins. docTags: createdAt: 2024-07-09T15:11:53.206Z --- # Overview ::::VerticalSplit{layout="middle"} :::VerticalSplitItem **DENTCA® Try-In for Carbon printers** is now available for Carbon M-Series printers to produce try-ins for dentures. This material will help improve ensure good fitting dentures created with DENTCA® Denture Teeth and DENTCA® Denture Base II. This guide will cover preparation, printing, and post-processing of your digital models with DENTCA® Try-In for Carbon printers resin. ::: :::VerticalSplitItem ![Printed try-ins](https://res.cloudinary.com/carbon3d/image/upload/Education/Materials/dental/dentca-try-in/try-in-stacked-on-blk_DSC3886-1000x563.jpg) ::: :::: This guide will cover preparation of your digital try-ins to properly prepare them for printing with DENTCA® Try-In resin. :::hint{type="info"} This resin is not currently compatible with the [AO Polishing Cassette](docId\:iFFh3q8-WLk-LIqr87bd5). ::: ## Resource Links ::::LinkArray :::LinkArrayItem{headerType="IMAGE" headerImage="https://api.archbee.com/api/optimize/uXbZOKjJTGpPhjapQ8fvM-IOQIJkNnkbUAw9Q-ap1FV-20241115-235121.jpg"} **[About the Material](https://www.carbon3d.com/materials/3d-printed-denture)** ::: :::LinkArrayItem{headerType="IMAGE" headerImage="https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/cJAKqDDnRUAeJAXNRThMm-20251016-221334.png"} **[Instructions for Use](https://s3-us-west-1.amazonaws.com/dentca.b-dentca-w-ss-paperclip/production/public/ckeditor_assets/attachments/614/01-09-301-019_directions_for_use_-dentca_try-in.pdf)** ::: :::LinkArrayItem{headerType="IMAGE" headerImage="https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/1r3fpdvMUMFVZGfey2Tjn-20251016-221405.jpg"} **[Safety Data Sheets](https://dentca.com/product/dentca-try-in)** *Scroll down to Download the Safety Data Sheet* ::: :::: ## Protocol Sheet This downloadable handout provides important usage information, including instructions about storage and post-processing. Print it out and bring it into the lab! ::File{src="https://api.archbee.com/api/presign/uXbZOKjJTGpPhjapQ8fvM-qvM65ufzFjUbNqsbDzQWg-20241108-015816.pdf" label="DENTCA_Try-In_Protocol_01.04.pdf"} ## Dental Post-Processing Grids ::::VerticalSplit{layout="right"} :::VerticalSplitItem One of our most popular downloads! This table provides washing and curing instructions for all supported dental resins. Print it and use it in the lab as a quick reference. ::: :::VerticalSplitItem ![Images of dental post-processing grids](https://res.cloudinary.com/carbon3d/image/upload/Education/Materials/materials_overview/3-dental-grids-stacked01-drop-shadows.png) ::: :::: ::::VerticalSplit{layout="left"} :::VerticalSplitItem **English** ::: :::VerticalSplitItem ::File{src="https://api.archbee.com/api/presign/3CesIL2dYMCHPZvRjp8S0/vQ2WsRger2d-CoLrn-m5f_dental-post-processing-grids-v0501.pdf" label="Dental-Post-Processing-Grids_v0501.pdf"} ::: :::: ::::VerticalSplit{layout="left"} :::VerticalSplitItem **German/Deutsch** ::: :::VerticalSplitItem ::File{src="https://api.archbee.com/api/presign/uXbZOKjJTGpPhjapQ8fvM-seBSLAiWUzNDRI1GCLlop-20241125-214312.pdf" label="ZAHNÄRZTLICHES NACHBEARBEITUNGSGITTER v03.71 DE Deutsch.pdf"} ::: :::: ::::VerticalSplit{layout="left"} :::VerticalSplitItem **Spanish/Español** ::: :::VerticalSplitItem ::File{src="https://api.archbee.com/api/presign/uXbZOKjJTGpPhjapQ8fvM-2i0UhzOfuA4aYJFusL1v2-20241203-180542.pdf" label="Rejilla de Posprocesamiento Dental v03.71 ES Espanol Spanish.pdf"} ::: :::: # General Orientation & Support Information ## Hide the Platform Use **Toggle platform** (or press **B**) to hide the platform before orienting parts. This will make it easier to see overhangs and place supports. ![](https://res.cloudinary.com/carbon3d/image/upload/v1741970064/Education/Materials/dental/__General_Use/toggle-platform02.gif) ## Use Patch and Fence tools to create supports ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ### Patch tool - The [Patch tool](docId\:VUbpoAitbLM11aM9-qJ1p) speeds up support creation by automatically supporting an area with just a few clicks. It is useful for supporting **larger areas** of overhang that would take longer to support manually. - It is often useful to support your parts with this tool **before **manually adding supports. ::Image[]{src="https://res.cloudinary.com/carbon3d/image/upload/v1741914725/Education/Materials/dental/__General_Use/standard-support-menu-patch.png" size="50" width="208" height="73" position="flex-start" showCaption="false"} ::: :::VerticalSplitItem ![](https://res.cloudinary.com/carbon3d/image/upload/v1741915319/Education/Materials/dental/__General_Use/standard-patch-denture.png) ::: :::: ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ### Fence tool - [Fence supports](docId\:VUbpoAitbLM11aM9-qJ1p) are manually placed by the user and are best suited on **linear overhangs **or smaller areas. - Fences provide stability while leaving smaller nubs than the default Bars option. ::Image[]{src="https://res.cloudinary.com/carbon3d/image/upload/v1741914724/Education/Materials/dental/__General_Use/standard-support-menu-fence.png" size="50" width="214" height="77" position="flex-start" showCaption="false"} ::: :::VerticalSplitItem ![](https://res.cloudinary.com/carbon3d/image/upload/v1741914737/Education/Materials/dental/__General_Use/standard-fence-partial01.png) ::: :::: :::hint{type="info"} Review [Supports](docId\:VUbpoAitbLM11aM9-qJ1p) in [Printer UI](docId\:oId4ZNZtZYeltTPVJ984a) course for more information. ::: # Orientation ## Proper Orientation Of Denture Try-ins :::hint{type="warning"} **Because try-ins are organic surfaces with no well defined flat areas, we do not recommend using Snap To Platform**. ::: Proper orientation of denture try-ins is critical to achieve the required accuracy, detail and surface quality. The following information will guide you through proper orientation technique. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/dyI-MJMrdzYCIpe10fp3n_image.png) **Maxillary** rotated 30 degrees with anterior rotated away from platform. ::: :::VerticalSplitItem ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/dedBsyJIKpyrfLN4mdu2e_image.png) **Mandibular **rotated 25 degrees with the posterior rotated away from the platform. ::: :::: ### Initial Orientation Of Try-ins Perform an initial orientation of both models so that they are roughly parallel with the platform. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem 1. Orient each model so that the tissue-facing surface is facing the platform. 2. Adjust the models so that the tops of the teeth are **mostly parallel with the platform**. 1. We recommend typing values into the XYZ axis fields. Changing orientation with the mouse or Snap to Platform function is more challenging. 3. Position the camera so you are looking straight down on the platform: 1. Push the **Reset camera icon** in the lower left corner of the screen to return to the default view. 2. Push **▲ to look straight down** at platform. 4. Make sure that the **posterior region of each model is facing the lower portion of the screen**. ::: :::VerticalSplitItem ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/82zIkEXzhhGQRehgQf3Vn_image.png) ::: :::: ### Final Orientation Of Try-ins ::::VerticalSplit{layout="middle"} :::VerticalSplitItem **Maxillary** 1. Click on the maxillary model to select it. 2. Enter **30** into the X Axis field. 3. The posterior of the try-in should be touching the platform. ::: :::VerticalSplitItem ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/IRWB4CUrSyBUHV0VY5776_image.png) ::: :::: ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/-ihPaZEzmex5BjWwIc-Tj_image.png) ::: :::VerticalSplitItem **Mandibular** 1. Click on the mandibular model to select it. 2. Enter **-25** into the X Axis field. 3. The anterior of the try-in should be touching the platform. ::: :::: # Supporting ## Adding Supports Dental try-ins require precise placement of supports. Because of this, we currently recommend manually adding supports to parts. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem 1. Click **Support** in the dark gray bar. 2. Under Position, select **Above Platform** to lift parts off the platform. 3. Skip **Auto Support Method** as this mode is not recommended. 4. Click **Manually Add** to go to the Support editing interface. ::: :::VerticalSplitItem ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/SPXsTJapeGD2dg-KVefcC_image.png) ::: :::: ::::VerticalSplit{layout="right"} :::VerticalSplitItem **Note**: Using either Auto Support method will result in **supports covering a large portion of the tissue-facing surfaces,** which will use more resin and require more cleanup. ::: :::VerticalSplitItem ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/M_iMKLXD3c0ecj6miUPIC_image.png) ::: :::: ## Fence Supports Fences are ideal for supporting model walls that face the platform. - They are easy to remove. - Contact points require less finishing. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem 1. Click on **Fences**. 2. Click a **series of points** on the model to define the fence. - Use **Overhang Detection** to find areas that need support. - Fences are only required at the edges. 3. Click **ESC key** and then hold down **E key** to reposition points. 4. Click **Generate** to create the fence geometry. 5. Repeat as needed. ::: :::VerticalSplitItem ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/By4WhhPkhv7UvK7WSJ0Zd_image.png) ::: :::: ### Supporting Maxillary Try-in: Outer Boundary Use fence supports to support the outer boundary of the model. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem **Fence Supports** 1. Support entire boundary of model with fence supports. - We recommend using a single, long fence for easier removal. - A sequence of 2 or more short fences is acceptable. Once the outer boundary of the maxillary model has been supported with fences, proceed to supporting the palette with bar supports. ::: :::VerticalSplitItem ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/uG3gcCHeOwkGij-qex2Co_image.png) ::: :::: ### Supporting Maxillary Try-in: Palette Support the palette with a field of bar supports to prevent deformation. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem **Bar Supports** 1. Press **Overhang detection** to highlight the areas to focus on. 2. Click on **Multiple add**. 3. Click in the palette area to create a **field of points** that will be contact points for bar supports. - Bar supports are usually required only in the palette area. - Place points within **3-6 mm** of each other. 4. Click **Generate** to create the bar supports. 5. **Check the bar supports** and move to supporting the mandibular model. ::: :::VerticalSplitItem ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/Trk4C3k0958VXW0r7SOd5_image.png) ::: :::: ### Supporting Mandibular Try-in Use **fences **to support the outer boundary of the model. Mandibular bases also require additional fences in the posterior areas to ensure proper fit. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem **Fence Supports** 1. Support entire **boundary of model** with fence supports. - We recommend using a single, long fence for easier removal. - A sequence of 2 or more short fences is acceptable. 2. Create **secondary lines of fences** along the posterior region. - Offset from outer fence by **2-4 mm**. ::: :::VerticalSplitItem ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/4C8z9lHV6SupMYS48Q1PK_image.png) ::: :::: ## Properly Oriented and Supported Try-ins - Tissue-facing surfaces facing platform. - Supported **Above Platform**. - Fences around part boundary. ::::VerticalSplit{layout="middle"} :::VerticalSplitItem ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/oV8JmgpPiTTWLHp75-2oH_image.png) **Maxillary Try-In** Rotated **30 degrees** with posterior tilted towards platform. ::: :::VerticalSplitItem ::Image[]{src="https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/DFqKlv_yaTf_1RIh73p2Z_image.png" size="98" width="536" height="536" position="center" showCaption="false"} **Mandibular Try-In** Rotated **25 degrees** with anterior tilted towards platform. ::: :::: # Nesting ![](https://res.cloudinary.com/carbon3d/image/upload/t_auto_quality_format/v1741997726/Education/Materials/dental/__General_Use/top-bar-layout.jpg) ::::VerticalSplit{layout="right"} :::VerticalSplitItem 1. Select the **Layout tab**** (Shift + L)** in the top menu bar. 2. Under **Auto Layout,** select **Gen2.** - Gen2 usually gives the most effecient packing for dental devices. 3. Enter at least **1 mm** in **Padding.** - Models require a minimum of 1 mm of space between them. 4. Leave **Optimize starting rotation** unchecked. - This leaves your parts in their previous orientations. 5. Leave **Allowed rotations** at the default setting. - This gives the software maximum flexibility to fit the most possible parts on the build platform. 6. Press the **Auto Layout** button to arrange your parts. ::: :::VerticalSplitItem ![Screen shot showing button locations](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/xAWXuUiH7J2wOdf4bWiJT_gen-2-auto-layout-callouts.png) ::: :::: If necessary, nesting can be changed manually: - Click and drag parts to adjust their position. - Modify Z rotation by using the **Spin **tool or manual rotations under the **Orient tab** **(Shift + O).** - Use the **Part List tab **as needed to more easily select models and focus on them. # Print Preparation ## Print Controls **Print Controls For Denture Teeth and Try-ins** ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/03Y-AD-CH9PF2eqXuKt2c_image.png) - Click **Print Controls** or **Shift + P** in the top menu bar. - Under **Print Profile** select **Default**. - Printing with release film can make part removal easier once printing is complete. If using release film, select **Print with release film**. ### Slicing - Under Slicing, select **Standard (100 µ)**. - Reducing the slice thickness by choosing the Fine (50 µ) or Super-fine (25 µ) settings will increase print time and may reduce part quality and accuracy. ## Project Analysis 1. Select the **Project Analysis** tab. 2. Click **Start Analysis** and wait for the processing to complete. 1. Note the required resin volume and print time. 3. Click **Add to Queue.** ![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/bWFfgfVxLwCTzFiBiyHnB_image.png) # Manufacturer Instructions for Use ::::LinkArray :::LinkArrayItem{headerType="IMAGE" headerImage="https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/cJAKqDDnRUAeJAXNRThMm-20251016-221334.png"} **[Instructions for Use](https://s3-us-west-1.amazonaws.com/dentca.b-dentca-w-ss-paperclip/production/public/ckeditor_assets/attachments/614/01-09-301-019_directions_for_use_-dentca_try-in.pdf)** ::: :::: # Questions & Support **For questions about the resin properties, printing, washing or curing your parts, please contact the DENTCA support team:** - Email: cs\@dentca.com - Phone: 424-558-8726 For questions about your **Carbon printer** or **Carbon software settings** used for this resin, please [contact Carbon](https://learn.carbon3d.com/carbon-support): - Email: [support@carbon3d.com](mailto\:support@carbon3d.com) - Phone: - **U.S. and Canada** 1-650-285-6307 option 2 - **Germany** +49 6102 5790849 - **UK **+44 (0) 2082 647484 - Printer UI: On the dashboard, select the **Prints** tab. **Select one of the printed projects.** Click **Request Help** in the lower right corner. ::Image[]{src="https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/YY6yCChSIB8SevmBwY76W_request-help-01.png" size="70" width="6541" height="3371" position="flex-start" alt="Location of button in the printer software" showCaption="false"}