---
title: Accessories
slug: hardware/spw-accessories
docTags: 
createdAt: 2024-07-06T21:38:12.238Z
---

# Basket

The basket gives customers an automated washing solution for the L1 printer. 

Once removed from the platform, parts can be placed in the interior pocket or the outer pockets.

::::VerticalSplit{layout="middle"}
:::VerticalSplitItem
![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/7yi9QYb8dZDRnewfWEtFR_accessories-basket-callouts01.jpg)
:::

:::VerticalSplitItem
1. Inner pocket with cinch closure
2. Handle
3. Lid
4. Latch
5. Outer pockets with magnetic closures
:::
::::

# M3 Part Washer Adapter

:::hint{type="warning"}
The **M3 Part Washer Adapter** is only compatible with the [legacy M3 platform](docId:2nxiKvTUJloOWyMApXUNL).
:::

::::VerticalSplit{layout="left"}
:::VerticalSplitItem
The M3 Platform has a different interface than M2 platforms that requires an adapter to fit in the Smart Part Washer.
:::

:::VerticalSplitItem
![M3 Legacy Part Washer Adapter](https://api.archbee.com/api/optimize/xcOI3p6O5jO0MVhoHv9rO-tf6HDxosNSp1trhtH6eIu-20240731-113121.jpg)
:::
::::

:::::::WorkflowBlock
:::::WorkflowBlockItem
::::VerticalSplit{layout="right"}
:::VerticalSplitItem
Slide adapter onto the locating pins

- Orient with point of triangular component aimed away from handle
- Slide closed both latches to lock in place
:::

:::VerticalSplitItem
![Lock adapter to platform](https://api.archbee.com/api/optimize/xcOI3p6O5jO0MVhoHv9rO-T1RiedPtIJuhLClbSbz2R-20240829-122433.jpg)
:::
::::
:::::

:::::WorkflowBlockItem
::::VerticalSplit{layout="right"}
:::VerticalSplitItem
Place platform in part washer
:::

:::VerticalSplitItem
![Place platform in Part Washer](https://api.archbee.com/api/optimize/xcOI3p6O5jO0MVhoHv9rO-l0PCPbM6k50hOB35IUR2--20240829-122437.jpg)
:::
::::
:::::

::::::WorkflowBlockItem
:::::VerticalSplit{layout="right"}
::::VerticalSplitItem
Select the print getting washed from the screen

The NFC tag on the adapter knows all of your lab's M3 prints, but you need to tell the washer which one you are washing.

:::hint{type="warning"}
Specifying the print is necessary to ensure the proper wash cycle for your parts.
:::
::::

:::VerticalSplitItem
![Select print to wash](https://api.archbee.com/api/optimize/xcOI3p6O5jO0MVhoHv9rO-HS6uZoU3FNQcyxc46BPsj-20240829-122508.png)
:::
:::::
::::::

:::WorkflowBlockItem
Follow all other steps for using a [Smart Part Washer](docId\:hVGVBThCKEk4HXJqQFpO_).
:::
:::::::

# Distiller for VF 1 Solvent

A distiller designed to recycle VF 1 solvent. It is able to recapture 5 - 6 gallons out of 7 gallons of soiled solvent.

:::hint{type="danger"}
The distiller is only for use with VF 1. It is not compatible with other solvents.
:::

- Custom design for Carbon customers. 
- Different models for domestic and international customers. 
- Includes a reusable ring and disposable liners. 

![](https://api.archbee.com/api/optimize/3CesIL2dYMCHPZvRjp8S0/xkRWUetV_4kC4H0Mh3GCr_distiller-features01.jpg)

::::WorkflowBlock
:::WorkflowBlockItem
**Emergency stop**
:::

:::WorkflowBlockItem
**Distill chamber**
:::

:::WorkflowBlockItem
**Locking screw**
:::

:::WorkflowBlockItem
**Touchscreen display**
:::

:::WorkflowBlockItem
**Drain valve**
:::

:::WorkflowBlockItem
<font color="#ff9900">**Distillation outlet**</font>

Located on the left side of the distiller
:::
::::

## Product Information

**CBG TECHNOLOGIES CUSTOM DISTILLER**

*Model # Carbon S-600*

See the [manufacturer product manual](docId\:f2lijE2SQQV94LE9Sgfzv) for more information.