---
title: Dental Quick Start
slug: dental-quick-start
description: Discover essential resources for dental newcomers to Carbon in our comprehensive guide. This document covers the DLS basics for labs, including safety protocols, hardware operation and DPR 10 workflow.
docTags: 
createdAt: 2025-02-14T21:31:58.560Z
---

Are you new to Carbon? Use the links below to get ramped up quickly.

![](https://res.cloudinary.com/carbon3d/image/upload/v1741638387/Education/Home/dental-quick-start-operator01.jpg)

# Basics

[Safety](docId\:EpLNOlhPOETRa_WXRrpjd) 

[Process Overview](docId:0k1g5pBC2uXr8zJqrhLcR) 

[DLS Printer Dynamics](docId\:U7XYytjyDp3BvsYy2qKcU) 

[Dental Lab Setup Video](docId\:fmxkrDho55o53rK9cLGJ-) 

# Hardware, Software and Materials

[Hardware Overview](docId\:jrQF7mAuTll-Spiy7v3N-)

[Cassette Care](docId\:Y_IMi7AeVLyJbsATEXxdB) 

[Dental Materials](docId\:LJaakrscGxL6cCrIgvprj) 

[Printer UI](docId\:oId4ZNZtZYeltTPVJ984a) 

[Orientation and Supports](docId\:DoBa4qKKoXpi-52yw3nCr) 

# DPR 10 Workflow

[Carbon DPR 10](docId\:Y2PWbCu6_Ifchm2sdgN0R) 

[Washing](docId\:AvN2rNsLSHhmUz9rbYkmN) 

[Dreve PCU LED](docId\:JLgbnwUiOTYwrCRMNPTbk) 

# Reference & Troubleshooting

[Dental Post-Processing Grids](docId\:BpjqrhGaWLhCHkvgPpY2L) 

[Dental Troubleshooting](docId:-JayexI5g2qiC7Sf6zliS) 



# Videos

Watch the videos below to get a quick overview of the DLS workflow.

## Print Preparation

Use the Printer UI to import, orient and support your models.

::embed[]{url="https://player.vimeo.com/video/527514513?dnt=1"}

## Check the Cassette

Inspect the cassette before printing.

::embed[]{url="https://player.vimeo.com/video/648839243?dnt=1"}

## One Part Resin Dispensing

Pour one-part resin into the cassette. Applies to all dental resins except Carbon FP3D.

::embed[]{url="https://player.vimeo.com/video/527518481?dnt=1"}

## Cartridge Resin Dispensing

Two-part resins require mixing and dispensing using a powered dispenser. FP3D only.

::embed[]{url="https://player.vimeo.com/video/1050201011?dnt=1"}

## Printing

Select the project and begin printing.

::embed[]{url="https://player.vimeo.com/video/527521617?dnt=1"}

## Remove Part from the Platform

Use a scraper to remove parts from the platform.

::embed[]{url="https://player.vimeo.com/video/527521205?dnt=1"}

## Washing

Wash parts in isopropyl alcohol (IPA).

::embed[]{url="https://player.vimeo.com/video/527523080?dnt=1"}

## UV Curing

Cure parts to achieve final strength.

::embed[]{url="https://player.vimeo.com/video/527516435?dnt=1"}

## Thermal Curing

Required for FP3D partial denture resin.

::embed[]{url="https://player.vimeo.com/video/527522760?dnt=1"}

## Cassette Cleaning

Clean the cassette.

::embed[]{url="https://player.vimeo.com/video/649708042?dnt=1"}